Don't keep anything in the workshop that is not used in woodturning. Bicycles and cars will get in the way and make it harder to clean up the shavings.
Virtually any style of home or building can be built with SIPS. I saw photographs a few days ago, of a beautiful Victorian style home being built with SIPS, with all the usual shapes, tower, and roof lines of the Victorian style. If this home could be built using SIPS any style could.
Start from the edgers of the drum and work your way to the middle. Let it rest for a few minutes then test the tone of the drum. Keep repeating until you have the desired tone. Avoid wetting the timber frame home of the drum and just like the heating method don't over do it. In fact use this method if you do over heat your drum to loosen the rawhide.
Wood paneling provides many design options. Set-it-off by framing the ceiling with decorative crown molding or creating designs within the ceiling with panel moldings.
A concrete block based foundation is another choice you have. It is strong, durable, and ideal for sheds meant for heavy storage. This type of floor is easier to install than a concrete slab and is less costly as well.
Lap garden fence panels are easy to install. You will need to purchase fence posts to install the fence panels. The main choices between fence posts is wooden or concrete. Wooden fence posts are the most popular choice and the most traditional. A wooden fence post needs to be sunk into the ground and secured with concrete or post concrete.
There are many fringe benefits to living in this way such as having a healthy immune system, getting a good nights sleep and feeling happy. These are always better than their alternative.
In most locations, while a house frame is being built it frequently becomes wet from rain and then dries out in the sun. This exposure to the weather can cause timber wall frames to warp. Warping can cause problems later on for windows, doors, and the internal finish. A steel frame will remain straight and true whatever the weather. There is a myth that a steel-frame house is noisy because it shrinks and expands as temperature changes. This aspect of a steel house has been greatly exaggerated, and a properly designed steel frame is not noisy.
A U-Value is expressed a W/m2K. That is, as a Watt per metre squared Kelvin. More commonly you would hear it expressed as a U-value of 0.21. The figure of 0.21 is expressing the amount of heat loss from a metre squared of the nominated material in Kelvin. The lower this figure is the less heat is lost.
jamb thickness, jamb thickness jamb